CITROËN C4 MANUAL PARKING BRAKE BONNET QUICK START GUIDE

MANUAL PARKING BRAKE BONNET QUICK START GUIDE CITROËN C4 2-BUTTON REMOTE CONTROL ELECTRIC PARKING BRAKE Manual application/release Applying ) Pull the parking brake lever fully up to immobilise your vehicle. Releasing ) Pull the parking brake lever up gently, press the release button then lower the lever fully. FUEL TANK Opening ) Open the front left door. ) Pull the interior bonnet release lever A , located at the bottom of the door frame. A. Unfolding/Folding the key Complete or selective unlocking of the vehicle Normal locking ) Push the exterior safety catch B to the left and raise the bonnet. Manual application of the parking brake is possible by pulling the control lever A . With the ignition on, manual release of the parking brake is possible by pressing the brake pedal and pulling then releasing the control lever A . Automatic application/release 3-BUTTON REMOTE CONTROL DIESEL A. Opening the fuel  ller  ap. Capacity of the fuel tank: approximately 60 litres. MISFUEL PREVENTION Mechanical device which prevents  lling the tank of a Diesel vehicle with petrol. It avoids the risk of engine damage that can result from  lling with the wrong fuel. Located in the  ller neck, the misfuel prevention device appears when the  ller cap is removed. A. Folding/unfolding the key ) Unclip the stay C from its housing. ) Fix the stay in the notch to hold the bonnet open. Closing ) Take the stay out of the support notch. ) Clip the stay in its housing. ) Lower the bonnet and release it at the end of its travel. ) Pull on the bonnet to check that it is secured correctly. PANORAMIC SUNROOF Complete or selective unlocking of the vehicle Selective unlocking of the boot. Normal locking FL - B71_C4 - ED 01-2010 - AN - DM/DPM/PEQF/DDB STEERING WHEEL ADJUSTMENT Press the accelerator pedal and let the clutch pedal up (manual gearbox), the parking brake is released automatically and progressively as you move off. With the vehicle at rest, on switching off the engine the parking brake is applied automatically. If this warning lamp is on in the instrument panel, the automatic application/release is deactivated ; apply and release the parking brake manually. Operation When a petrol  ller nozzle is introduced into the fuel  ller neck of your Diesel vehicle, it comes into contact with the  ap. The system remains closed and prevents  lling. Do not persist but introduce a Diesel type  ller nozzle. 1. Opening the blind (four positions possible). 2. Closing the blind (initial position). 1. Unlocking the adjuster. 2. Adjustment for height and reach. 3. Locking the adjuster. Before leaving the vehicle, check that the brake warning lamp in the instrument panel and the P warning lamp in the control lever A are on  xed (not  ashing) .

STOP & START Engine going into STOP mode Engine going into START mode The "ECO" warning lamp comes on in the instrument panel and the engine is put into standby: - with a manual gearbox ; at speeds below 12 mph (20 km/h), when you put the gear lever into neutral, and you release the clutch pedal, - with the 6-speed electronic gearbox system; at speeds below 5 mph (8 km/h), when you press the brake pedal or you put the gear lever into position N.

Get The File | Download here | PDF Manual